Inventory Shrinkage: Find Where Stock Went

Inventory Shrinkage: How Small Sellers Find Where Stock Went

Inventory shrinkage is the gap between recorded and counted stock. Learn how to check sales, receiving, damage, and locations before changing your count.

By · Editorial policy

Published · 7 min read

A maker compares a shelf count with an inventory notebook to trace a stock difference

Inventory shrinkage is the stock your records expect but a physical count cannot find. For a small maker, that gap might involve one damaged candle, a market sale not entered yet, or supplies counted in the wrong unit. It does not tell you by itself what happened.

Count first, then follow the item's recent movements. Check every place where it might be, and compare sales, purchases, batches, samples, and adjustments. A changed number alone won't show whether the cause was a missed entry, damage, or theft.

In Short: Compare the recorded quantity with a physical count. Recount a mismatch, trace recent movements, note the cause only when you can support it, and adjust the record to the verified quantity.

What inventory shrinkage means in a small shop

Inventory shrinkage describes a difference between book inventory and physical stock. The National Retail Federation explains that shrink can include theft, damage, spoilage, administrative errors, and other losses. A shortage is the difference to investigate; it is not a diagnosis.

Formula Box

Check Calculation What it tells you
Unit shortage Recorded quantity − counted quantity How many fewer units the count found
Unit surplus Counted quantity − recorded quantity How many more units the count found

For example, if a record lists 60 bars and the shelf count finds 55, the unit shortage is 5 bars. Those five could be broken, given as samples, sold without an entry, stored in another place, or missing for another reason. The arithmetic identifies the size of the gap, not its cause.

You can express that unit difference against the recorded quantity: 5 divided by 60 is about 8 in every 100 recorded bars. That describes this example's count gap only. It is not a target or a useful comparison with a different maker unless both counts use the same item basis, time period, and rules for what counts as a loss. If a count finds 62 bars instead, record a two-bar surplus and check for an unlogged return, purchase, or earlier counting error.

You may also see shrinkage shown as a percentage. That figure depends on choices such as whether the loss is valued at cost or retail, what period it covers, and which kinds of loss are included. NRF says retailers use different methods and stopped publishing an average annual shrink percentage because it was no longer an accurate benchmark. A large-retailer average is not a target for a craft business.

An illustrated formula card shows recorded stock minus counted stock leading to a five-unit gap

Where a small seller's count gaps come from

A mismatch can start anywhere stock changes hands or location. Look for a movement without a matching entry, or a count made with inconsistent units, before you conclude that stock was stolen.

  • Sale not entered: A market tally or online order has not been copied into the stock log.
  • Purchase received incorrectly: The delivery quantity differs from what was entered, or a box was counted as individual pieces.
  • Transfer not recorded: Supplies or finished pieces moved from the workroom to a stall, market tote, or another shelf.
  • Damage or samples: A broken jar, test batch, gift, or display sample left sellable stock without a note.
  • Counting mix-up: Similar scents, sizes, or colors were combined, a shelf was skipped, or a unit such as a pack was confused with a single item.
  • Theft or loss: Someone removed stock, or an item was misplaced. Check the other explanations too; the count alone cannot separate them.

The U.S. Government Accountability Office's guide to physical inventory counts recommends tracing variances through transaction histories, movement records, receiving documents, and production usage. Its examples concern larger operations, but the sequence is useful at a workbench too: verify the number, then follow what could have changed it. A 2025 Shopify guide to stock count discrepancies also lists missed transactions, receiving differences, and unit mismatches among possible causes. Use those lists as prompts for your own records, not as a diagnosis.

Inventory shrinkage: what to check first

Match the pattern you see to the next record or place to inspect. Keep the first check small and specific. A single discrepancy rarely justifies a broad conclusion about a person or process.

What you notice Check first What to write down
Only one scent or size is short Count similar variants separately Item name, unit, and recount
The market box is short, back room is high Check transfers and returned stock From place, to place, and date
Supplies are low after a batch Compare the recipe and batch amount Supplies used and finished pieces made
The record is high after delivery Match the purchase entry to the received quantity Ordered, received, and still due
Several items differ after a busy day Reconcile sales notes, samples, returns, and damage Entry source and any missing movement

If the count stays short after those checks, record an unexplained variance. A later count or a matching entry may explain it; until then, leave the cause open.

Keep a small variance log beside your count sheet. For each gap, write the date, the place counted, the unit used, and the size of the difference. Add the next step you checked, such as a market closeout or a delivery record, and note what it showed. One entry is only a clue. When the same note appears across three counts in a row, look at the matching step in your routine. A repeated receiving mismatch may call for a second check at delivery; repeated market differences may call for a closeout tally before stock returns to the workroom.

A maker's count, worked through

Suppose a soap maker's sheet says 60 lavender bars are ready for sale. A careful count finds 55 in the workroom. This is a fictional example to show the method, not a customer result or a benchmark.

First, count the bars again by scent and by place. The maker finds 55 in the workroom and three in a market tote, for 58 sellable bars. The sheet still says 60, so two bars remain unaccounted for. The maker checks the notes and finds that two bars were used as samples but never recorded. The tote bars were not missing; they were in another place. The sample entry explains the two-bar shortage.

Next, the maker checks the sales log and batch notes. Record the verified 58 bars on hand across the workroom and tote, plus an adjustment for the two samples. Record the tote as a transfer if its location is not already in the sheet. Leave any later unexplained difference without a guessed cause.

The record now shows 55 bars in the workroom and three in the market tote, with two samples recorded as used. Check that the inventory total matches the location totals. The inventory spreadsheet template guide covers basic stock fields; an inventory count sheet can help keep paper counts consistent.

A maker checks soap bars on a workroom shelf and in a market tote against a notebook

A short routine from count to cause

Use the same order whenever a count and the record disagree. Consistency makes the next mismatch easier to compare.

  1. Choose the item, place, and unit. Count “bars” as bars and “jars” as jars. Separate variants that could be confused.
  2. Pause movement if practical. If sales, batching, or transfers continue during the count, note each one so it is not counted twice or missed.
  3. Count without copying the expected number first. A fresh count is less likely to repeat the record's error. If the difference matters, count again.
  4. Compare the result with each place's record. Include the workroom, shop, online orders awaiting packing, market tote, and any other location you actually use.
  5. Trace recent movements. Check sales, purchases received, transfers, batches, returns, samples, breakage, and earlier adjustments. If a mismatch repeats, the cycle counting guide shows how to check smaller groups of stock on a schedule.
  6. Record the verified correction and the reason you know. An adjustment should reflect the physical count. Keep an unknown cause unknown; add a short note so you can compare it with a later count.
  7. Look for a repeated pattern. If the same kind of mismatch returns, change the relevant step: receiving, unit labels, market closeout, sample notes, or batch recording.

If someone else can help, ask them to count without seeing the quantity in the sheet first. The GAO guide describes blind counts as a useful control in larger operations. A small shop can use the same simple habit: write the physical count down, then compare it with the expected quantity.

For a small seller, a repeatable count is enough to keep the next sale and restock grounded in current quantities. If you sell in more than one place, the overselling guide explains how to keep the shared quantity current between sales.

A four-part illustrated routine shows counting, comparing, tracing movements, and recording a verified correction

How the Ultimate Inventory Tracker Handles This

The Ultimate Inventory Tracker (by Cosmo Suite: one Google Sheets and Excel file, 12 tabs, $9 once) keeps sales, purchases, adjustments, transfers, and batches in connected tabs. A count correction can be recorded in Adjustments with a reason, while Stock by Place keeps location quantities visible. Cost and profit are for your own tracking, not tax figures.

It can help you keep the movement trail in one file, but you still have to count the physical items and enter each change. It does not connect to an online shop or till, scan barcodes, or tell you why a count differs. If that manual routine fits how you sell, see the Ultimate Inventory Tracker and its linked tabs. The file also comes as a Google Sheets and Excel inventory tracker with sample and clean copies.

Sources and limits

The NRF source discusses retail shrink, not a measured rate for small makers. Its current explanation notes that calculation methods vary and that the organization stopped publishing a single average. The GAO guide describes count and variance research in larger operations. The fictional soap example above is arithmetic for illustration only. This article is about stock records, not accounting or tax treatment.

Editorial note: each source link and the example arithmetic were checked on 14 November 2026.

Frequently asked questions

What is inventory shrinkage?

Inventory shrinkage is the difference between the quantity your records say you should have and the quantity a physical count finds. It can come from theft, damage, samples, counting mistakes, receiving errors, or a sale or transfer that was never recorded. The difference is a clue to investigate, not proof of one particular cause.

How do you calculate inventory shrinkage?

For a simple unit check, subtract the counted quantity from the recorded quantity. If your sheet says 60 bars and a careful count finds 55, the gap is 5 bars. A percentage depends on the value basis and time period you choose, so define those before comparing results.

Does inventory shrinkage always mean theft?

No. Theft is one possible cause, but a mismatch can also come from breakage, samples, incorrect units, an unrecorded sale, a receiving error, or stock stored in another place. Check the count and movement records before deciding what happened.

How can a small seller reduce inventory shrinkage?

Count the same items in the same way, record sales and other movements when they happen, and note damage, samples, and transfers. When a count differs, check the recent entries and every storage or selling place before adjusting the record. Repeated cause notes can show which part of the routine needs attention.

How often should I count inventory?

There is no single schedule for every small shop. Count high-movement, valuable, or often-mismatched items more frequently, then use your own count history to set a rhythm for the rest. Keep the date, place, and unit consistent so one count can be compared with the next.

Can a spreadsheet identify why stock is missing?

A spreadsheet can keep a movement log and show a difference between the recorded and counted quantity, but it cannot tell you the cause on its own. The Ultimate Inventory Tracker does not connect to an online shop or till and does not scan barcodes, so you log or paste each sale and investigate count differences yourself.

Sources

  1. National Retail Federation: The misperception of shrink and its impact on organized retail crime
  2. U.S. Government Accountability Office: Best Practices in Achieving Consistent, Accurate Physical Counts of Inventory and Related Property
  3. Shopify: Stock Count Discrepancy: Causes and How to Fix It

Ultimate Inventory Tracker

Ready for the Ultimate Inventory Tracker?

Log each sale, purchase and batch once. One stock file you own, pay once.

Get instant access
Ultimate Inventory Tracker